1999 Nissan Fairlady Z tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1999 Nissan Fairlady Z.

1999 Nissan Fairlady Z tire sizes

225/50R16

Bolt pattern

5x114.3

Other years

1995 1996 1997 1998 1999 2000 2002 2003 All 1969–2027

Fitment tables

4 trims sold in 1999

Open a trim for its factory package and every alternative size, front and rear.

Nissan Fairlady Z IV (Z32) Facelift

1998 – 2000 4 trims

Fairlady Z 3.0 (GF-GZ32)

227 hp · VG30DE V6 225/50 R16 92V 1 fitment

GenerationIV (Z32) Facelift 1998–2000

Power227 hp

EngineVG30DE V6, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/50 R16 92V	16x7.5 ET45 ~~5x114.3~~	28	Tires Rims

Fairlady Z 3.0 (GF-Z32)

227 hp · VG30DE V6 225/50 R16 92V 1 fitment

GenerationIV (Z32) Facelift 1998–2000

Power227 hp

EngineVG30DE V6, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/50 R16 92V	16x7.5 ET45 ~~5x114.3~~	28	Tires Rims

Fairlady Z 3.0 Turbo (GF-CZ32)

276 hp · VG30DETT V6 225/50 R16 92V 1 fitment

GenerationIV (Z32) Facelift 1998–2000

Power276 hp

EngineVG30DETT V6, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/50 R16 92V	16x7.5 ET45 ~~5x114.3~~	28	Tires Rims

Fairlady Z 3.0 Turbo (GF-GCZ32)

276 hp · VG30DETT V6 225/50 R16 92V 1 fitment

GenerationIV (Z32) Facelift 1998–2000

Power276 hp

EngineVG30DETT V6, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/50 R16 92V	16x7.5 ET45 ~~5x114.3~~	28	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.