Skip to content
tirewheelguide.com

2005 Nissan Fairlady Z tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Nissan Fairlady Z.

2005 Nissan Fairlady Z tire sizes

225/45R18225/50R17235/50R17245/45R18245/40R18
Bolt pattern
Other years
20002002200320042005200620072008 All 1969–2027
Fitment tables

3 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Nissan Fairlady Z V (Z33)

2002 – 2008 3 trims

Fairlady Z 3.5i (HZ33)

276 hp · V6 225/50 R17 94V / 235/50 R17 96V 2 fitments
GenerationV (Z33) 2002–2008
Power276 hp
EngineV6, Petrol
Center bore66 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/50 R17 94V17x7.5 ET30 5x114.3–TiresRims
Rear235/50 R17 96V17x8 ET33 5x114.3–TiresRims
Front225/45 ZR18 91W18x8 ET30 5x114.3–TiresRims
Rear245/45 ZR18 96W18x8.5 ET33 5x114.3–TiresRims

Fairlady Z 3.5i (Z33)

276 hp · V6 225/50 R17 94V / 235/50 R17 96V 2 fitments
GenerationV (Z33) 2002–2008
Power276 hp
EngineV6, Petrol
Center bore66 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/50 R17 94V17x7.5 ET30 5x114.3–TiresRims
Rear235/50 R17 96V17x8 ET33 5x114.3–TiresRims
Front225/45 ZR18 91W18x8 ET30 5x114.3–TiresRims
Rear245/45 ZR18 96W18x8.5 ET33 5x114.3–TiresRims

Fairlady Z 3.5i (Z33)

290 hp · V6 225/45 ZR18 91W 2 fitments
GenerationV (Z33) 2002–2008
Power290 hp
EngineV6, Petrol
Center bore66 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
225/45 ZR18 91W18x8.5 ET33 5x114.3–TiresRims
245/40 ZR18 93W19x8.5 ET33 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading