2008 Nissan Grand Livina tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Nissan Grand Livina.

2008 Nissan Grand Livina tire sizes

175/70R14 185/65R15

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2007 – 2010 2 trims

103 hp · HR16DE I4 175/70 R14 2 fitments

GenerationL10 2007–2010

Power103 hp

EngineHR16DE I4, Petrol

Center bore66.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R14	14x5.5 ET40 ~~4x114.3~~	–	Tires Rims
185/65 R15	15x5.5 ET38 ~~4x114.3~~	–	Tires Rims

125 hp · MR18DE I4 175/70 R14 2 fitments

GenerationL10 2007–2010

Power125 hp

EngineMR18DE I4, Petrol

Center bore66.1 mm

PCD4x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R14	14x5.5 ET40 ~~4x114.3~~	–	Tires Rims
185/65 R15	15x5.5 ET38 ~~4x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.