Skip to content

2012 Nissan GT-R tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Nissan GT-R.

2012 Nissan GT-R tire sizes

Bolt pattern
Fitment tables

5 trims sold in 2012

Open a trim for its factory package and every alternative size, front and rear.

Nissan GT-R GT-R

2007 – 2016 5 trims

GT-R 3.8

530 hp · 3.8L V6 255/40 ZR20 97Y / 285/35 ZR20 100Y 1 fitment
GenerationGT-R 2007–2016
MarketUSA
Power530 hp
Engine3.8L V6, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
Front255/40 ZR20 97Y20x9.5 ET45 5x114.329TiresRims
Rear285/35 ZR20 100Y20x10.5 ET25 5x114.329TiresRims

GT-R 3.8

532 hp · 3.8L VR38DETT V6 255/40 ZR20 97Y / 285/35 ZR20 100Y 1 fitment
GenerationGT-R 2007–2016
MarketEurope
Power532 hp
Engine3.8L VR38DETT V6, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
Front255/40 ZR20 97Y20x9.5 ET45 5x114.330TiresRims
Rear285/35 ZR20 100Y20x10.5 ET25 5x114.329TiresRims

GT-R 3.8

523 hp · 3.8L VR38 V6 255/40 ZR20 97Y 1 fitment
GenerationGT-R 2007–2016
MarketEurope
Power523 hp
Engine3.8L VR38 V6, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
255/40 ZR20 97Y20x10.5 ET25 5x114.329TiresRims

GT-R 3.8

542 hp · 3.8L VR38DETT V6 255/40 ZR20 97Y 1 fitment
GenerationGT-R 2007–2016
MarketEurope
Power542 hp
Engine3.8L VR38DETT V6, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
255/40 ZR20 97Y20x10.5 ET25 5x114.32TiresRims

GT-R 3.8 (DBA-R35)

542 hp · 3.8L VR38DETT V6 255/40 ZR20 97Y 1 fitment
GenerationGT-R 2007–2016
MarketJapan
Power542 hp
Engine3.8L VR38DETT V6, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
255/40 ZR20 97Y20x10.5 ET25 5x114.32TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.