Skip to content

2022 Nissan Juke tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 Nissan Juke.

2022 Nissan Juke tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2022

Open a trim for its factory package and every alternative size, front and rear.

Nissan Juke F16

2019 – 2027 2 trims

Juke 1.0 DIG-T

113 hp · 1.0L I3 215/65 R16 88T 6 fitments
GenerationF16 2019–2027
MarketEurope
Power113 hp
Engine1.0L I3, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R16 88T16x6.5 ET35 5x114.3–TiresRims
215/60 R17 96H17x7 ET35 5x114.3–TiresRims
225/45 R19 96W19x7.5 ET35 5x114.3–TiresRims
215/60 R16 95V16x6.5 ET35 5x114.3–TiresRims
215/60 R17 96V17x7.5 ET35 5x114.3–TiresRims
225/45 R19 92W19x7.5 ET38 5x114.3–TiresRims

Juke 1.0 DIG-T

115 hp · 1.0L I3 215/65 R16 88T 6 fitments
GenerationF16 2019–2027
MarketSoutheast Asia
Power115 hp
Engine1.0L I3, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R16 88T16x6.5 ET35 5x114.3–TiresRims
215/60 R17 96H17x7 ET35 5x114.3–TiresRims
225/45 R19 96W19x7.5 ET35 5x114.3–TiresRims
215/60 R16 95V16x6.5 ET35 5x114.3–TiresRims
215/60 R17 96V17x7.5 ET35 5x114.3–TiresRims
225/45 R19 92W19x7.5 ET38 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.