2018 Nissan Lafesta tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2018 Nissan Lafesta.

2018 Nissan Lafesta tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2011 – 2018 3 trims

137 hp · I4 195/65 R15 91H 2 fitments

GenerationB35 2011–2018

Power137 hp

EngineI4, Petrol

Center bore67 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91H	15x6 ET52.5 ~~5x114.3~~	–	Tires Rims
205/55 R16 91V	16x6.5 ET52.5 ~~5x114.3~~	–	Tires Rims

148 hp · I4 195/65 R15 91H 3 fitments

GenerationB35 2011–2018

Power148 hp

EngineI4, Petrol

Center bore67 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91H	15x6 ET52.5 ~~5x114.3~~	–	Tires Rims
205/55 R16 91V	16x6.5 ET52.5 ~~5x114.3~~	–	Tires Rims
205/50 R17 89V	17x6.5 ET52.5 ~~5x114.3~~	–	Tires Rims

149 hp · I4 195/65 R15 91H 2 fitments

GenerationB35 2011–2018

Power149 hp

EngineI4, Petrol

Center bore67 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91H	15x6 ET52.5 ~~5x114.3~~	–	Tires Rims
205/50 R17 89V	17x6.5 ET52.5 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.