Skip to content

2024 Nissan Leaf tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Nissan Leaf.

2024 Nissan Leaf tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

Nissan Leaf II

2017 – 2027 2 trims

Leaf EV (Hatchback, 5d)

148 hp · EM57 Electric EM57 205/55 R16 / 205/55 R16 4 fitments
GenerationII 2017–2027
MarketUSA
Power148 hp
EngineEM57 Electric EM57, Electric
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront205/55 R1616x 5x114.336TiresRims
Rear205/55 R16 5x114.336Tires
OE205/55 R1616x6.5 ET40 5x114.336TiresRims
OE215/50 R1717x6.5 ET45 5x114.336TiresRims
Alt225/45 ZR1818x7 ET45 5x114.3TiresRims

Leaf EV ZAA-ZE1 (Hatchback, 5d)

148 hp · EM57 Electric EM57 205/55 R16 / 205/55 R16 4 fitments
GenerationII 2017–2027
MarketJapan
Power148 hp
EngineEM57 Electric EM57, Electric
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront205/55 R1616x 5x114.3TiresRims
Rear205/55 R16 5x114.3Tires
OE205/55 R1616x6.5 ET40 5x114.3TiresRims
OE215/50 R1717x6.5 ET45 5x114.3TiresRims
Alt225/45 ZR1818x7 ET45 5x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.