1992 Nissan March tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 Nissan March.

1992 Nissan March tire sizes

155/70R13 175/60R13 175/65R13

Bolt pattern

4x100

2 generations were sold in 1992. Check your chassis code before ordering wheels.

Other years

1988 1989 1990 1991 1992 1993 1994 1995 All 1982–2026

Fitment tables

4 trims sold in 1992

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Nissan March II (K11)

1992 – 2002 2 trims

March 1.0 (K11)

58 hp · I4 145x R12 2 fitments

GenerationII (K11) 1992–2002

Power58 hp

EngineI4, Petrol

Center bore59.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R12	12x4 ET45 ~~4x100~~	–	Tires Rims
155/70 R13 75S	13x5 ET45 ~~4x100~~	–	Tires Rims

March 1.3 (HK11)

78 hp · I4 155/70 R13 75S 2 fitments

GenerationII (K11) 1992–2002

Power78 hp

EngineI4, Petrol

Center bore59.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/70 R13 75S	13x5 ET45 ~~4x100~~	–	Tires Rims
175/60 R13 76H	13x5 ET45 ~~4x100~~	–	Tires Rims

Nissan March I (K10)

1982 – 1992 2 trims

March 1.0 (K10)

51 hp · I4 145x R12 1 fitment

GenerationI (K10) 1982–1992

Power51 hp

EngineI4, Petrol

Center bore59.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R12	12x4 ET45 ~~4x100~~	–	Tires Rims

March 1.0 Turbo (EK10)

109 hp · I4 175/65 R13 2 fitments

GenerationI (K10) 1982–1992

Power109 hp

EngineI4, Petrol

Center bore59.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R13	13x4 ET45 ~~4x100~~	–	Tires Rims
155x R13	13x5 ET45 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.