1998 Nissan March tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Nissan March.

1998 Nissan March tire sizes

155/70R13 175/60R13

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1992 – 2002 3 trims

58 hp · I4 145x R12 2 fitments

GenerationII (K11) 1992–2002

Power58 hp

EngineI4, Petrol

Center bore59.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R12	12x4 ET45 ~~4x100~~	–	Tires Rims
155/70 R13 75S	13x5 ET45 ~~4x100~~	–	Tires Rims

78 hp · I4 155/70 R13 75S 1 fitment

GenerationII (K11) 1992–2002

Power78 hp

EngineI4, Petrol

Center bore59.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/70 R13 75S	13x5 ET45 ~~4x100~~	–	Tires Rims

78 hp · I4 155/70 R13 75S 2 fitments

GenerationII (K11) 1992–2002

Power78 hp

EngineI4, Petrol

Center bore59.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/70 R13 75S	13x5 ET45 ~~4x100~~	–	Tires Rims
175/60 R13 76H	13x5 ET45 ~~4x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.