2004 Nissan March tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Nissan March.

2004 Nissan March tire sizes

165/70R14 175/60R15 185/55R15

Bolt pattern

4x100

Other years

2000 2001 2002 2003 2004 2005 2006 2007 All 1982–2026

Fitment tables

4 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear.

Nissan March III (K12)

2002 – 2010 4 trims

March 1.2 (AK12)

89 hp · I4 165/70 R14 81S 2 fitments

GenerationIII (K12) 2002–2010

Power89 hp

EngineI4, Petrol

Center bore60.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 R14 81S	14x5 ET45 ~~4x100~~	–	Tires Rims
175/60 R15 81H	15x5.5 ET50 ~~4x100~~	–	Tires Rims

March 1.2 SR (AK12)

106 hp · I4 185/55 R15 81V 1 fitment

GenerationIII (K12) 2002–2010

Power106 hp

EngineI4, Petrol

Center bore60.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/55 R15 81V	15x6 ET50 ~~4x100~~	–	Tires Rims

March 1.4 (BK12)

97 hp · I4 165/70 R14 81S 2 fitments

GenerationIII (K12) 2002–2010

Power97 hp

EngineI4, Petrol

Center bore60.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 R14 81S	14x5 ET45 ~~4x100~~	–	Tires Rims
175/60 R15 81H	15x5.5 ET50 ~~4x100~~	–	Tires Rims

March 1.4 (BNK12)

95 hp · I4 165/70 R14 81S 2 fitments

GenerationIII (K12) 2002–2010

Power95 hp

EngineI4, Petrol

Center bore60.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 R14 81S	14x5 ET45 ~~4x100~~	–	Tires Rims
175/60 R15 81H	15x5.5 ET50 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.