1991 Nissan Maxima tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1991 Nissan Maxima.

1991 Nissan Maxima tire sizes

205/60R15 205/65R15 195/65R15 215/65R15

Bolt pattern

5x114.3

Other years

1987 1988 1989 1990 1991 1992 1993 1994 All 1981–2023

Fitment tables

4 trims sold in 1991

Open a trim for its factory package and every alternative size, front and rear.

Nissan Maxima III (J30)

1988 – 1994 4 trims

Maxima 3.0

160 hp · V6 205/65 R15 93H 2 fitments

GenerationIII (J30) 1988–1994

MarketUSA

Power160 hp

EngineV6, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15 93H	15x6 ET40 ~~5x114.3~~	29	Tires Rims
205/65 R15 93H	15x6.5 ET40 ~~5x114.3~~	29	Tires Rims

Maxima 3.0

168 hp · V6 205/65 R15 93H 4 fitments

GenerationIII (J30) 1988–1994

MarketEurope

Power168 hp

EngineV6, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15 93H	15x6 ET40 ~~5x114.3~~	29	Tires Rims
195/65 R15 91V	15x6 ET40 ~~5x114.3~~	2.2	Tires Rims
215/65 R15 96V	15x6 ET40 ~~5x114.3~~	2	Tires Rims
205/65 R15 94V	15x6.5 ET40 ~~5x114.3~~	2	Tires Rims

Maxima J30

N/A · N/A 205/60 R15 1 fitment

GenerationIII (J30) 1988–1994

MarketJapan

PowerN/A

EngineN/A

Center boreN/A

PCD5x114.3

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R15	15x6 ET40 ~~5x114.3~~	–	Tires Rims

Maxima PJ30

N/A · N/A 205/60 R15 1 fitment

GenerationIII (J30) 1988–1994

MarketJapan

PowerN/A

EngineN/A

Center boreN/A

PCD5x114.3

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R15	15x6 ET40 ~~5x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.