1986 Nissan Micra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1986 Nissan Micra.

1986 Nissan Micra tire sizes

155/70R13

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1982 – 1989 2 trims

54 hp · I4 155/70 R13 75T 1 fitment

GenerationI (K10) 1982–1989

Power54 hp

EngineI4, Petrol

Center bore59.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/70 R13 75T	13x4.5 ET45 ~~4x100~~	28	Tires Rims

59 hp · I4 155/70 R13 75T 2 fitments

GenerationI (K10) 1982–1989

Power59 hp

EngineI4, Petrol

Center bore59.1 mm

PCD4x100

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/70 R13 75T	13x4.5 ET45 ~~4x100~~	28	Tires Rims
155x R12 77S	12x4.5 ET45 ~~4x100~~	28	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.