Skip to content

2023 Nissan Micra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2023 Nissan Micra.

Bolt pattern

2 generations were sold in 2023. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2023

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Nissan Micra V (K14)

2017 – 2023 2 trims

Micra 1.0 IG-T (Hatchback, 5d)

91 hp · 1.0 L I3 Petrol 1.0 L I3 185/65 R15 3 fitments
GenerationV (K14) 2017–2023
MarketEurope
Power91 hp
Engine1.0 L I3 Petrol 1.0 L I3, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE185/65 R1515x6 ET50 4x100TiresRims
OE195/55 R1616x6 ET50 4x100TiresRims
OE205/45 R1717x6.5 ET50 4x100TiresRims

Micra 1.0i (Hatchback, 5d)

70 hp · 1.0 L I3 Petrol 1.0 L I3 185/65 R15 3 fitments
GenerationV (K14) 2017–2023
Power70 hp
Engine1.0 L I3 Petrol 1.0 L I3, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE185/65 R1515x6 ET50 4x100TiresRims
Alt195/55 R1616x6 ET50 4x100TiresRims
Alt205/45 R1717x6.5 ET50 4x100TiresRims

Nissan Micra IV (K13) Facelift

2014 – 2023 1 trim

Micra 1.2i (Hatchback, 5d)

75 hp · 1.2 L I3 Petrol 1.2 L I3 165/70 R14 3 fitments
GenerationIV (K13) Facelift 2014–2023
Power75 hp
Engine1.2 L I3 Petrol 1.2 L I3, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE165/70 R1414x5.5 ET45 4x10032TiresRims
OE175/60 R1515x5.5 ET50 4x10032TiresRims
Alt185/55 R1616x6 ET55 4x10032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.