2008 Nissan Navara tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Nissan Navara.

2008 Nissan Navara tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2005 – 2010 2 trims

172 hp · 2.5L YD25DDTi I4 255/65 R17 110T 4 fitments

GenerationD40 2005–2010

MarketEurope

Power172 hp

Engine2.5L YD25DDTi I4, Diesel

Center bore66.1 mm

PCD6x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
255/65 R17 110T	17x7 ET30 ~~6x114.3~~	2.8	Tires Rims
235/70 R16 106H	16x7 ET30 ~~6x114.3~~	2.8	Tires Rims
255/70 R16 111T	16x7 ET30 ~~6x114.3~~	2.8	Tires Rims
255/60 R18 112V	18x7.5 ET30 ~~6x114.3~~	2.4	Tires Rims

142 hp · I4 255/65 R17 110T 4 fitments

GenerationD40 2005–2010

MarketMiddle East

Power142 hp

EngineI4, Diesel

Center bore66.1 mm

PCD6x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
255/65 R17 110T	17x7 ET30 ~~6x114.3~~	2.8	Tires Rims
235/70 R16 106H	16x7 ET30 ~~6x114.3~~	2.8	Tires Rims
255/70 R16 111T	16x7 ET30 ~~6x114.3~~	2.8	Tires Rims
255/60 R18 112V	18x7.5 ET30 ~~6x114.3~~	2.4	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.