Skip to content

2013 Nissan Navara tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Nissan Navara.

2013 Nissan Navara tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear.

Nissan Navara D40 Facelift

2010 – 2016 4 trims

Navara 2.5 dCi

188 hp · 2.5L YD25DDTi I4 255/65 R17 110T 4 fitments
GenerationD40 Facelift 2010–2016
MarketEurope
Power188 hp
Engine2.5L YD25DDTi I4, Diesel
Center bore66.1 mm
PCD6x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
255/65 R17 110T17x7 ET30 6x114.32.8TiresRims
235/70 R16 106H16x7 ET30 6x114.32.8TiresRims
255/70 R16 111T16x7 ET30 6x114.32.8TiresRims
255/60 R18 112V18x7.5 ET30 6x114.32.4TiresRims

Navara 2.5 dCi

142 hp · I4 205x R15 2 fitments
GenerationD40 Facelift 2010–2016
MarketMiddle East
Power142 hp
EngineI4, Diesel
Center bore66.1 mm
PCD6x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205x R1515x7 ET20 6x114.3–TiresRims
255/70 R1616x7 ET40 6x114.3–TiresRims

Navara 2.5i

154 hp · I4 195x R15 2 fitments
GenerationD40 Facelift 2010–2016
MarketMiddle East
Power154 hp
EngineI4, Petrol
Center bore66.1 mm
PCD6x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195x R1515x7 ET20 6x114.3–TiresRims
205x R1616x7 ET40 6x114.3–TiresRims

Navara 3.0 dCi

228 hp · 3.0L V9X V6 255/65 R17 110T 4 fitments
GenerationD40 Facelift 2010–2016
MarketEurope
Power228 hp
Engine3.0L V9X V6, Diesel
Center bore66.1 mm
PCD6x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
255/65 R17 110T17x7 ET30 6x114.32.8TiresRims
235/70 R16 106H16x7 ET30 6x114.32.8TiresRims
255/70 R16 111T16x7 ET30 6x114.32.8TiresRims
255/60 R18 112V18x7.5 ET30 6x114.32.4TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.