Skip to content

2013 Nissan NV200 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Nissan NV200.

2013 Nissan NV200 tire sizes

Bolt patterns
4x114.3
NV200
5x114.3
NV200
Fitment tables

4 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear.

Nissan NV200 NV200

2013 – 2021 USA market 4 trims

NV200 1.5 dCi

89 hp · K9K I4 175/70 R14 95T 2 fitments
GenerationNV200 2013–2021
MarketEurope
Power89 hp
EngineK9K I4, Diesel
Center bore66.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 95T14x5.5 ET45 4x114.3TiresRims
175/70 R14 89R14x5.5 ET45 4x114.3TiresRims

NV200 1.5 dCi

109 hp · K9K I4 175/70 R14 95T 2 fitments
GenerationNV200 2013–2021
MarketEurope
Power109 hp
EngineK9K I4, Diesel
Center bore66.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 95T14x5.5 ET45 4x114.3TiresRims
175/70 R14 89R14x5.5 ET45 4x114.3TiresRims

NV200 1.6i

109 hp · HR16DE I4 175/70 R14 95T 2 fitments
GenerationNV200 2013–2021
MarketEurope
Power109 hp
EngineHR16DE I4, Petrol
Center bore66.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 95T14x5.5 ET45 4x114.3TiresRims
175/70 R14 89R14x5.5 ET45 4x114.3TiresRims

NV200 2.0i

131 hp · 2.0L MR20DE I4 185/60 R15 94T 2 fitments
GenerationNV200 2013–2021
MarketUSA
Power131 hp
Engine2.0L MR20DE I4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R15 94T15x5.5 ET45 5x114.33.3TiresRims
185/65 R1515x5.5 ET45 5x114.342TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.