1990 Nissan Patrol tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1990 Nissan Patrol.

1990 Nissan Patrol tire sizes

215/80R16 265/70R16

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1988 – 1998 3 trims

114 hp · 2.8L RD28T I6 31x10.50 R15 5 fitments

GenerationIV (Y60) 1988–1998

Power114 hp

Engine2.8L RD28T I6, Diesel

Center bore110.1 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
31x10.50 R15	15x7 ET5 ~~6x139.7~~	–	Tires Rims
6.50x R16	16x6 ET30 ~~6x139.7~~	–	Tires Rims
215/80 R16	16x6 ET30 ~~6x139.7~~	–	Tires Rims
265/70 R16	16x8 ET5 ~~6x139.7~~	–	Tires Rims
215x R15 106S	15x7 ET5 ~~6x139.7~~	2.5	Tires Rims

162 hp · 4.2L TB42E I6 31x10.50 R15 4 fitments

GenerationIV (Y60) 1988–1998

Power162 hp

Engine4.2L TB42E I6, Petrol

Center bore110.1 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
31x10.50 R15	15x7 ET5 ~~6x139.7~~	–	Tires Rims
6.50x R16	16x6 ET30 ~~6x139.7~~	–	Tires Rims
215/80 R16	16x6 ET30 ~~6x139.7~~	–	Tires Rims
265/70 R16	16x8 ET5 ~~6x139.7~~	–	Tires Rims

114 hp · 4.2L TD422 I6 31x10.50 R15 4 fitments

GenerationIV (Y60) 1988–1998

Power114 hp

Engine4.2L TD422 I6, Diesel

Center bore110.1 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
31x10.50 R15	15x7 ET5 ~~6x139.7~~	–	Tires Rims
6.50x R16	16x6 ET30 ~~6x139.7~~	–	Tires Rims
215/80 R16	16x6 ET30 ~~6x139.7~~	–	Tires Rims
265/70 R16	16x8 ET5 ~~6x139.7~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.