2021 Nissan Primastar tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Nissan Primastar.

2021 Nissan Primastar tire sizes

215/65R16 215/60R17

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2001 – 2015 3 trims

143 hp · 2.0L I4 215/65 R16 109T / 215/65 R16 107T 2 fitments

GenerationPrimastar 2001–2015

Power143 hp

Engine2.0L I4, Diesel

Center bore66.1 mm

PCD5x114

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front215/65 R16 109T	16x6 ET50 ~~5x114~~	–	Tires Rims
Rear215/65 R16 107T	16x6 ET50 ~~5x114~~	–	Tires Rims
Front215/60 R17 109H	17x6 ET50 ~~5x114~~	–	Tires Rims
Rear215/60 R17 107H	17x6 ET50 ~~5x114~~	–	Tires Rims

109 hp · 2.0L I4 215/65 R16 109T / 215/65 R16 107T 2 fitments

GenerationPrimastar 2001–2015

Power109 hp

Engine2.0L I4, Diesel

Center bore66.1 mm

PCD5x114

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front215/65 R16 109T	16x6 ET50 ~~5x114~~	–	Tires Rims
Rear215/65 R16 107T	16x6 ET50 ~~5x114~~	–	Tires Rims
Front215/60 R17 109H	17x6 ET50 ~~5x114~~	–	Tires Rims
Rear215/60 R17 107H	17x6 ET50 ~~5x114~~	–	Tires Rims

118 hp · 2.0L I4 215/65 R16 109T 2 fitments

GenerationPrimastar 2001–2015

Power118 hp

Engine2.0L I4, Diesel

Center bore66.1 mm

PCD5x114

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R16 109T	16x6 ET50 ~~5x114~~	–	Tires Rims
215/60 R17 109H	17x6 ET50 ~~5x114~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.