2002 Nissan Safari tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Nissan Safari.

2002 Nissan Safari tire sizes

265/70R16 235/80R16 275/70R16 275/65R17

Bolt pattern

6x139.7

Other years

1998 1999 2000 2001 2002 2003 2004 2005 All 1987–2007

Fitment tables

4 trims sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

Nissan Safari V (Y61)

1997 – 2007 Japan market 4 trims

Safari 3.0DT (WTY61)

168 hp · I4 265/70 R16 1 fitment

GenerationV (Y61) 1997–2007

Power168 hp

EngineI4, Diesel

Center bore110 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/70 R16	16x8 ET10 ~~6x139.7~~	–	Tires Rims

Safari 4.2DT (VRGY61)

158 hp · I6 265/70 R16 1 fitment

GenerationV (Y61) 1997–2007

Power158 hp

EngineI6, Diesel

Center bore110 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/70 R16	16x8 ET10 ~~6x139.7~~	–	Tires Rims

Safari 4.5 (WGY61)

197 hp · I6 235/80 R16 2 fitments

GenerationV (Y61) 1997–2007

Power197 hp

EngineI6, Petrol

Center bore110 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/80 R16	16x6 ET30 ~~6x139.7~~	–	Tires Rims
265/70 R16	16x8 ET10 ~~6x139.7~~	–	Tires Rims

Safari 4.8 (WFGY61)

241 hp · I6 275/70 R16 2 fitments

GenerationV (Y61) 1997–2007

Power241 hp

EngineI6, Petrol

Center bore110 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
275/70 R16	16x8 ET10 ~~6x139.7~~	–	Tires Rims
275/65 R17	17x8 ET10 ~~6x139.7~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.