Skip to content

2004 Nissan Sentra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Nissan Sentra.

Bolt patterns
4x114.3
V (B15)
4x100
III (B13)

2 generations were sold in 2004. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Nissan Sentra V (B15)

2000 – 2006 3 trims

Sentra 1.8i

126 hp · I4 195/60 R15 87H 1 fitment
GenerationV (B15) 2000–2006
MarketUSA
Power126 hp
EngineI4, Petrol
Center bore66.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R15 87H15x6 ET45 4x114.32.1TiresRims

Sentra SE-R 2.5i

165 hp · I4 195/55 R16 86H 1 fitment
GenerationV (B15) 2000–2006
MarketUSA
Power165 hp
EngineI4, Petrol
Center bore66.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R16 86H16x6 ET42 4x114.32.1TiresRims

Sentra SE-R Spec V 2.5i

175 hp · I4 215/45 ZR17 1 fitment
GenerationV (B15) 2000–2006
MarketUSA
Power175 hp
EngineI4, Petrol
Center bore66.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
215/45 ZR1717x7 ET47 4x114.333TiresRims

Nissan Sentra III (B13)

1995 – 2016 Latin America market 1 trim

Sentra 1.6

110 hp · 1.6L GA16DE I4 175/70 SR13 3 fitments
GenerationIII (B13) 1995–2016
MarketLatin America
Power110 hp
Engine1.6L GA16DE I4, Petrol
Center bore59.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 SR1313x5 ET35 4x10029TiresRims
175/65 HR1414x5.5 ET40 4x10030TiresRims
195/55 HR1515x6 ET40 4x10030TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.