Skip to content

2013 Nissan Serena tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Nissan Serena.

2013 Nissan Serena tire sizes

Bolt pattern
Fitment tables

5 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear.

Nissan Serena IV (C26)

2010 – 2016 5 trims

Serena 2.0 (HC26)

147 hp · I4 195/65 R15 91H 3 fitments
GenerationIV (C26) 2010–2016
Power147 hp
EngineI4, Hybrid
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91H15x5.5 ET45 5x114.336TiresRims
195/60 R16 89H16x6 ET45 5x114.341TiresRims
205/50 ZR17 93Y17x6.5 ET51 5x114.341TiresRims

Serena 2.0 (HFC26)

147 hp · I4 195/65 R15 91S 2 fitments
GenerationIV (C26) 2010–2016
Power147 hp
EngineI4, Hybrid
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91S15x5.5 ET45 5x114.336TiresRims
195/60 R16 89H16x6 ET45 5x114.341TiresRims

Serena 2.0i (C26)

145 hp · I4 195/65 R15 91S 2 fitments
GenerationIV (C26) 2010–2016
Power145 hp
EngineI4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91S15x5.5 ET45 5x114.336TiresRims
195/60 R16 89H16x6 ET45 5x114.341TiresRims

Serena 2.0i (DBA-NC26)

142 hp · MR20DD I4 195/65 R15 91S 1 fitment
GenerationIV (C26) 2010–2016
Power142 hp
EngineMR20DD I4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91S15x5.5 ET45 5x114.336TiresRims

Serena 2.0i (FNC26)

142 hp · I4 195/65 R15 91S 1 fitment
GenerationIV (C26) 2010–2016
Power142 hp
EngineI4, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91S15x5.5 ET45 5x114.336TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.