Skip to content

2016 Nissan Skyline Crossover tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Nissan Skyline Crossover.

2016 Nissan Skyline Crossover tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2016

Open a trim for its factory package and every alternative size, front and rear.

Nissan Skyline Crossover Skyline Crossover

2009 – 2016 2 trims

Skyline Crossover 3.7i (DBA-J50)

326 hp · VQ37VHR V6 225/55 R18 98H 1 fitment
GenerationSkyline Crossover 2009–2016
Power326 hp
EngineVQ37VHR V6, Petrol
Center bore66 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R18 98H18x8 ET47 5x114.333TiresRims

Skyline Crossover 3.7i (DBA-NJ50)

326 hp · VQ37VHR V6 225/55 R18 98H 1 fitment
GenerationSkyline Crossover 2009–2016
Power326 hp
EngineVQ37VHR V6, Petrol
Center bore66 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R18 98H18x8 ET47 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.