Skip to content

2025 Nissan Skyline tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 Nissan Skyline.

2025 Nissan Skyline tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear.

Nissan Skyline XIII (V37) Facelift II

2019 – 2027 2 trims

Skyline 3.5i 5BA-RV37 (Saloon)

400 hp · 3.5 L VR30DDTT V6 Petrol 3.5 L VR30DDTT V6 245/40 ZR19 3 fitments
GenerationXIII (V37) Facelift II 2019–2027
MarketJapan
Power400 hp
Engine3.5 L VR30DDTT V6 Petrol 3.5 L VR30DDTT V6, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE245/40 ZR1919x8.5 ET50 5x114.3–TiresRims
OE225/50 ZR1818x7.5 ET45 5x114.3–TiresRims
OE245/40 ZR1919x8.5 ET50 5x114.3–TiresRims

Skyline 3.5i Nismo 5BA-RV37 (Saloon)

414 hp · 3.5 L VR30DDTT V6 Petrol 3.5 L VR30DDTT V6 245/40 ZR19 / 265/35 ZR19 1 fitment
GenerationXIII (V37) Facelift II 2019–2027
MarketJapan
Power414 hp
Engine3.5 L VR30DDTT V6 Petrol 3.5 L VR30DDTT V6, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront245/40 ZR1919x9 ET47 5x114.3–TiresRims
Rear265/35 ZR1919x9.5 ET50 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.