2001 Nissan Skystar tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Nissan Skystar.

2001 Nissan Skystar tire sizes

265/70R16

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1998 – 2002 2 trims

133 hp · 2.5 L YD25DDTi I4 Diesel 2.5 L YD25DDTi I4 265/70 R16 / 265/70 R16 1 fitment

GenerationD22 1998–2002

MarketEurope

Power133 hp

Engine2.5 L YD25DDTi I4 Diesel 2.5 L YD25DDTi I4, Diesel

Center bore108 mm

PCD6x139.7

ThreadM12 x 1.25

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front265/70 R16	16x ~~6x139.7~~	–	Tires Rims
	Rear265/70 R16	~~6x139.7~~	–	Tires

99 hp · 2.7 L TD27 I4 Diesel 2.7 L TD27 I4 265/70 R16 / 265/70 R16 1 fitment

GenerationD22 1998–2002

MarketEurope

Power99 hp

Engine2.7 L TD27 I4 Diesel 2.7 L TD27 I4, Diesel

Center bore108 mm

PCD6x139.7

ThreadM12 x 1.25

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front265/70 R16	16x ~~6x139.7~~	–	Tires Rims
	Rear265/70 R16	~~6x139.7~~	–	Tires

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.