Skip to content

1981 Nissan Sunny tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1981 Nissan Sunny.

1981 Nissan Sunny tire sizes

Bolt pattern
Fitment tables

4 trims sold in 1981

Open a trim for its factory package and every alternative size, front and rear.

Nissan Sunny B11

1981 – 1986 4 trims

Sunny 1.3 (E-B11)

74 hp · E13S I4 145x SR13 3 fitments
GenerationB11 1981–1986
Power74 hp
EngineE13S I4, Petrol
Center bore59.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
145x SR1313x5 ET40 4x100–TiresRims
155x R13 79T13x5 ET40 4x10025TiresRims
175/70 R13 82H13x5 ET40 4x10025TiresRims

Sunny 1.5 (E-HB11)

94 hp · E15E I4 165/70 SR13 4 fitments
GenerationB11 1981–1986
Power94 hp
EngineE15E I4, Petrol
Center bore59.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165/70 SR1313x5 ET40 4x100–TiresRims
145x SR1313x5 ET40 4x100–TiresRims
155x SR1313x5 ET40 4x10025TiresRims
175/70 R13 82H13x5 ET40 4x10025TiresRims

Sunny 1.5 (E-HB11)

84 hp · E15S I4 145x SR13 4 fitments
GenerationB11 1981–1986
Power84 hp
EngineE15S I4, Petrol
Center bore59.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
145x SR1313x5 ET40 4x100–TiresRims
155x SR1313x5 ET40 4x10025TiresRims
165/70 SR1313x5 ET40 4x10025TiresRims
175/70 R13 82H13x5 ET40 4x10025TiresRims

Sunny 1.7 D (N-SB11)

60 hp · CD17 I4 155x SR13 4 fitments
GenerationB11 1981–1986
Power60 hp
EngineCD17 I4, Diesel
Center bore59.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155x SR1313x5 ET40 4x10025TiresRims
145x SR1313x5 ET40 4x10025TiresRims
165/70 SR1313x5 ET40 4x10025TiresRims
175/70 R13 82H13x5 ET40 4x10025TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.