2013 Nissan Sylphy tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Nissan Sylphy.

2013 Nissan Sylphy tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2012 – 2021 3 trims

188 hp · MR16DDT I4 205/50 R17 89V 1 fitment

GenerationB17 2012–2021

MarketSoutheast Asia

Power188 hp

EngineMR16DDT I4, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/50 R17 89V	17x6.5 ET45 ~~5x114.3~~	2.1	Tires Rims

114 hp · 1.6L HR16DE I4 195/60 R16 89H 1 fitment

GenerationB17 2012–2021

MarketSoutheast Asia

Power114 hp

Engine1.6L HR16DE I4, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/60 R16 89H	16x6.5 ET40 ~~5x114.3~~	–	Tires Rims

129 hp · 1.8L MRA8DE I4 195/65 R15 91S 2 fitments

GenerationB17 2012–2021

MarketJapan

Power129 hp

Engine1.8L MRA8DE I4, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91S	15x5.5 ET40 ~~5x114.3~~	–	Tires Rims
195/60 R16 89H	16x6.5 ET40 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.