1997 Nissan Terrano Regulus tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Nissan Terrano Regulus.

1997 Nissan Terrano Regulus tire sizes

245/70R16 255/65R16

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1996 – 2002 2 trims

148 hp · I4 245/70 R16 107S 4 fitments

GenerationTerrano Regulus 1996–2002

Power148 hp

EngineI4, Diesel

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/70 R16 107S	16x7 ET30 ~~6x139.7~~	–	Tires Rims
245/70 R16	16x7 ET0 ~~6x139.7~~	–	Tires Rims
245/70 R16	16x7 ET25 ~~6x139.7~~	–	Tires Rims
245/70 R16	16x8 ET0 ~~6x139.7~~	–	Tires Rims

168 hp · V6 245/70 R16 107S 5 fitments

GenerationTerrano Regulus 1996–2002

Power168 hp

EngineV6, Petrol

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/70 R16 107S	16x7 ET30 ~~6x139.7~~	–	Tires Rims
255/65 R16 109S	16x7 ET30 ~~6x139.7~~	–	Tires Rims
245/70 R16	16x7 ET0 ~~6x139.7~~	–	Tires Rims
245/70 R16	16x7 ET25 ~~6x139.7~~	–	Tires Rims
245/70 R16	16x8 ET0 ~~6x139.7~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.