Skip to content

2018 Nissan Versa tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2018 Nissan Versa.

2018 Nissan Versa tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2018

Open a trim for its factory package and every alternative size, front and rear.

Nissan Versa II Facelift

2015 – 2023 4 trims

Versa 1.0i

76 hp · 1.0L HR10DE I3 Flex-Fuel 185/65 R15 86H 3 fitments
GenerationII Facelift 2015–2023
MarketLatin America
Power76 hp
Engine1.0L HR10DE I3 Flex-Fuel
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 86H15x5.5 ET40 4x1002.1TiresRims
165/70 R1414x5.5 ET40 4x1003TiresRims
195/55 R1616x6 ET45 4x1002.1TiresRims

Versa 1.6i

109 hp · HR16DE I4 185/65 R15 86H 2 fitments
GenerationII Facelift 2015–2023
MarketUSA
Power109 hp
EngineHR16DE I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 86H15x5.5 ET40 4x10033TiresRims
195/55 R16 86H16x6 ET45 4x10036TiresRims

Versa 1.6i

106 hp · 1.6L HR16DE I4 185/65 R15 86H 2 fitments
GenerationII Facelift 2015–2023
MarketLatin America
Power106 hp
Engine1.6L HR16DE I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 86H15x5.5 ET40 4x10033TiresRims
195/55 R16 86H16x6 ET45 4x10036TiresRims

Versa 1.6i

109 hp · 1.6L HR16DE I4 Flex-Fuel 185/65 R15 86H 3 fitments
GenerationII Facelift 2015–2023
MarketLatin America
Power109 hp
Engine1.6L HR16DE I4 Flex-Fuel
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 86H15x5.5 ET40 4x1002.1TiresRims
165/70 R1414x5.5 ET40 4x1003TiresRims
195/55 R16 86H16x6 ET45 4x1002.1TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.