Skip to content

2004 Nissan XTerra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Nissan XTerra.

2004 Nissan XTerra tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear.

Nissan XTerra I Facelift

2002 – 2004 3 trims

XTerra 2.4i

143 hp · I4 265/70 R15 110S 1 fitment
GenerationI Facelift 2002–2004
Power143 hp
EngineI4, Petrol
Center bore100.3 mm
PCD6x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
265/70 R15 110S15x7 ET40 6x139.730TiresRims

XTerra 3.3i

180 hp · V6 265/70 R16 111S 1 fitment
GenerationI Facelift 2002–2004
Power180 hp
EngineV6, Petrol
Center bore100.3 mm
PCD6x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
265/70 R16 111S16x7 ET40 6x139.735TiresRims

XTerra 3.3i

210 hp · V6 265/70 R16 111S 2 fitments
GenerationI Facelift 2002–2004
Power210 hp
EngineV6, Petrol
Center bore100.3 mm
PCD6x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
265/70 R16 111S16x7 ET40 6x139.730TiresRims
265/65 R17 110T17x8 ET40 6x139.730TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.