Skip to content
tirewheelguide.com

1960 Oldsmobile 88 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1960 Oldsmobile 88.

1960 Oldsmobile 88 tire sizes

215/75R14225/70R15
Bolt pattern
Other years
19561957195819591960196119621963 All 1949–1999
Fitment tables

3 trims sold in 1960

Open a trim for its factory package and every alternative size, front and rear.

Oldsmobile 88 IV B-body Facelift

1960 – 1960 USA market 3 trims

88 6.1 2-bbl

240 hp · 6.1L V8 8.50x D14 4 fitments
GenerationIV B-body Facelift 1960–1960
Power240 hp
Engine6.1L V8, Petrol
Center bore78.3 mm
PCD5x127
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
8.50x D1414x5.5 ET0 5x127–TiresRims
215/75 R1414x5.5 ET0 5x127–TiresRims
7.60x D1515x5.5 ET0 5x127–TiresRims
225/70 R1515x6.5 ET0 5x127–TiresRims

88 6.1 4-bbl

295 hp · 6.1L V8 8.50x D14 4 fitments
GenerationIV B-body Facelift 1960–1960
Power295 hp
Engine6.1L V8, Petrol
Center bore78.3 mm
PCD5x127
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
8.50x D1414x5.5 ET0 5x127–TiresRims
215/75 R1414x5.5 ET0 5x127–TiresRims
7.60x D1515x5.5 ET0 5x127–TiresRims
225/70 R1515x6.5 ET0 5x127–TiresRims

88 6.5 4-bbl

315 hp · 6.5L V8 8.50x D14 4 fitments
GenerationIV B-body Facelift 1960–1960
Power315 hp
Engine6.5L V8, Petrol
Center bore78.3 mm
PCD5x127
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
8.50x D1414x5.5 ET0 5x127–TiresRims
215/75 R1414x5.5 ET0 5x127–TiresRims
7.60x D1515x5.5 ET0 5x127–TiresRims
225/70 R1515x6.5 ET0 5x127–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading