1995 Oldsmobile 98 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Oldsmobile 98.

1995 Oldsmobile 98 tire sizes

225/60RS16

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1991 – 1996 USA market 2 trims

200 hp · L36 V6 225/60 SR16 1 fitment

GenerationXII C-platform 1991–1996

Power200 hp

EngineL36 V6, Petrol

Center bore70.3 mm

PCD5x115

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/60 SR16	16x6.5 ET52 ~~5x115~~	30	Tires Rims

225 hp · V6 225/60 SR16 1 fitment

GenerationXII C-platform 1991–1996

Power225 hp

EngineV6, Petrol

Center bore70.3 mm

PCD5x115

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/60 SR16	16x6.5 ET52 ~~5x115~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.