1998 Oldsmobile Bravada tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Oldsmobile Bravada.

1998 Oldsmobile Bravada tire sizes

235/75R15

Bolt pattern

5x120.65

2 generations were sold in 1998. Check your chassis code before ordering wheels.

Other years

1993 1994 1996 1997 1998 1999 2000 2001 All 1991–2004

Fitment tables

2 trims sold in 1998

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Oldsmobile Bravada II Facelift

1998 – 2001 USA market 1 trim

Bravada 4.3

190 hp · V6 235/75 R15 102S 1 fitment

GenerationII Facelift 1998–2001

Power190 hp

EngineV6, Petrol

Center bore70.3 mm

PCD5x120.65

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/75 R15 102S	15x7 ET50 ~~5x120.65~~	35	Tires Rims

Oldsmobile Bravada II

1996 – 1998 USA market 1 trim

Bravada 4.3

190 hp · V6 235/75 R15 105S 1 fitment

GenerationII 1996–1998

Power190 hp

EngineV6, Petrol

Center bore70.3 mm

PCD5x120.65

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/75 R15 105S	15x7 ET13 ~~5x120.65~~	35	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.