1970 Oldsmobile Cutlass tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1970 Oldsmobile Cutlass.

1970 Oldsmobile Cutlass tire sizes

205/75RS14 225/70RS14

Bolt pattern

5x120.65

Other years

1966 1967 1968 1969 1970 1971 1972 1973 All 1961–1999

Fitment tables

4 trims sold in 1970

Open a trim for its factory package and every alternative size, front and rear.

Oldsmobile Cutlass III A-body

1968 – 1972 USA market 4 trims

Cutlass 4.1

161 hp · I6 205/75 SR14 2 fitments

GenerationIII A-body 1968–1972

Power161 hp

EngineI6, Petrol

Center bore70.3 mm

PCD5x120.65

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 SR14	14x6 ET0 ~~5x120.65~~	–	Tires Rims
225/70 SR14	14x7 ET0 ~~5x120.65~~	–	Tires Rims

Cutlass 5.7

308 hp · V8 205/75 SR14 2 fitments

GenerationIII A-body 1968–1972

Power308 hp

EngineV8, Petrol

Center bore70.3 mm

PCD5x120.65

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 SR14	14x6 ET0 ~~5x120.65~~	–	Tires Rims
225/70 SR14	14x7 ET0 ~~5x120.65~~	–	Tires Rims

Cutlass 5.7 W-31

325 hp · V8 205/75 SR14 2 fitments

GenerationIII A-body 1968–1972

Power325 hp

EngineV8, Petrol

Center bore70.3 mm

PCD5x120.65

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 SR14	14x6 ET0 ~~5x120.65~~	–	Tires Rims
225/70 SR14	14x7 ET0 ~~5x120.65~~	–	Tires Rims

Cutlass 7.5

342 hp · V8 205/75 SR14 2 fitments

GenerationIII A-body 1968–1972

Power342 hp

EngineV8, Petrol

Center bore70.3 mm

PCD5x120.65

Thread7/16" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 SR14	14x6 ET0 ~~5x120.65~~	–	Tires Rims
225/70 SR14	14x7 ET0 ~~5x120.65~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.