Skip to content
tirewheelguide.com

1980 Oldsmobile Cutlass tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1980 Oldsmobile Cutlass.

1980 Oldsmobile Cutlass tire sizes

205/75RS14225/70RS14
Bolt pattern
Other years
19761977197819791980198119971998 All 1961–1999
Fitment tables

6 trims sold in 1980

Open a trim for its factory package and every alternative size, front and rear.

Oldsmobile Cutlass V A-body

1978 – 1981 USA market 6 trims

Cutlass 3.8

110 hp · V6 205/75 SR14 2 fitments
GenerationV A-body 1978–1981
Power110 hp
EngineV6, Petrol
Center bore70.3 mm
PCD5x120.65
Thread7/16" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 SR1414x6 ET0 5x120.65–TiresRims
225/70 SR1414x7 ET0 5x120.65–TiresRims

Cutlass 4.3

105 hp · V8 205/75 SR14 2 fitments
GenerationV A-body 1978–1981
Power105 hp
EngineV8, Petrol
Center bore70.3 mm
PCD5x120.65
Thread7/16" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 SR1414x6 ET0 5x120.65–TiresRims
225/70 SR1414x7 ET0 5x120.65–TiresRims

Cutlass 4.3 D

90 hp · LF7 V8 205/75 SR14 2 fitments
GenerationV A-body 1978–1981
Power90 hp
EngineLF7 V8, Diesel
Center bore70.3 mm
PCD5x120.65
Thread7/16" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 SR1414x6 ET0 5x120.65–TiresRims
225/70 SR1414x7 ET0 5x120.65–TiresRims

Cutlass 4.9

135 hp · V8 205/75 SR14 2 fitments
GenerationV A-body 1978–1981
Power135 hp
EngineV8, Petrol
Center bore70.3 mm
PCD5x120.65
Thread7/16" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 SR1414x6 ET0 5x120.65–TiresRims
225/70 SR1414x7 ET0 5x120.65–TiresRims

Cutlass 5.0

150 hp · V8 205/75 SR14 2 fitments
GenerationV A-body 1978–1981
Power150 hp
EngineV8, Petrol
Center bore70.3 mm
PCD5x120.65
Thread7/16" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 SR1414x6 ET0 5x120.65–TiresRims
225/70 SR1414x7 ET0 5x120.65–TiresRims

Cutlass 5.7 D

119 hp · LF9 V8 205/75 SR14 2 fitments
GenerationV A-body 1978–1981
Power119 hp
EngineLF9 V8, Diesel
Center bore70.3 mm
PCD5x120.65
Thread7/16" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205/75 SR1414x6 ET0 5x120.65–TiresRims
225/70 SR1414x7 ET0 5x120.65–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading