Skip to content

2003 Opel Agila tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Opel Agila.

2003 Opel Agila tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear.

Opel Agila A (H00)

2000 – 2007 4 trims

Agila 1.0i

58 hp · 1.0L Z10XE I3 155/65 R14 75T 2 fitments
GenerationA (H00) 2000–2007
Power58 hp
Engine1.0L Z10XE I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R14 75T14x4.5 ET45 4x10033TiresRims
165/60 R14 75T14x4.5 ET45 4x1002.5TiresRims

Agila 1.0i

59 hp · 1.0L Z10XEP I3 155/65 R14 75T 2 fitments
GenerationA (H00) 2000–2007
Power59 hp
Engine1.0L Z10XEP I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R14 75T14x4.5 ET45 4x10033TiresRims
165/60 R14 75T14x4.5 ET45 4x1002.5TiresRims

Agila 1.2i

74 hp · 1.2L Z12XE I4 155/65 R14 75T 2 fitments
GenerationA (H00) 2000–2007
Power74 hp
Engine1.2L Z12XE I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155/65 R14 75T14x4.5 ET45 4x10033TiresRims
165/60 R14 75T14x4.5 ET45 4x1002.5TiresRims

Agila 1.3 CDTi

68 hp · 1.3L Z13DT I4 165/60 R14 79T 2 fitments
GenerationA (H00) 2000–2007
Power68 hp
Engine1.3L Z13DT I4, Diesel
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
165/60 R14 79T14x4.5 ET45 4x10036TiresRims
165/55 R15 75H15x5 ET45 4x10036TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.