1982 Opel Corsa tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1982 Opel Corsa.

1982 Opel Corsa tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1982 – 1993 Europe market 1 trim

44 hp · 1.0L S10 I4 145x R13 75S 6 fitments

GenerationA (S83) 1982–1993

Power44 hp

Engine1.0L S10 I4, Petrol

Center bore56.6 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R13 75S	13x4.5 ET49 ~~4x100~~	–	Tires Rims
145/80 R13 75S	13x4.5 ET49 ~~4x100~~	–	Tires Rims
145/80 R13 75S	13x5 ET49 ~~4x100~~	–	Tires Rims
165/70 R13 79S	13x5 ET49 ~~4x100~~	–	Tires Rims
165/65 R14 79T	14x5.5 ET49 ~~4x100~~	–	Tires Rims
185/60 R14 82T	14x5.5 ET49 ~~4x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.