Skip to content

2013 Opel Insignia Country Tourer tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Opel Insignia Country Tourer.

2013 Opel Insignia Country Tourer tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear.

Opel Insignia Country Tourer A Facelift

2013 – 2017 Europe market 3 trims

Insignia Country Tourer 2.0 CDTi

161 hp · 2.0L A20DTH I4 225/55 ZR17 97W 5 fitments
GenerationA Facelift 2013–2017
Power161 hp
Engine2.0L A20DTH I4, Diesel
Center bore67.1 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 ZR17 97W17x7 ET41 5x12032TiresRims
225/55 R17 101V17x7 ET41 5x12032TiresRims
235/50 ZR18 97W18x8 ET42 5x12032TiresRims
235/45 R18 98V18x8 ET42 5x12032TiresRims
245/40 ZR19 98W19x8.5 ET45 5x12032TiresRims

Insignia Country Tourer 2.0 CDTi

192 hp · 2.0L A20DTR I4 225/55 ZR17 97W 5 fitments
GenerationA Facelift 2013–2017
Power192 hp
Engine2.0L A20DTR I4, Diesel
Center bore67.1 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 ZR17 97W17x7 ET41 5x12032TiresRims
225/55 R17 101V17x7 ET41 5x12032TiresRims
235/50 ZR18 97W18x8 ET42 5x12032TiresRims
235/45 R18 98V18x8 ET42 5x12032TiresRims
245/40 ZR19 98W19x8.5 ET45 5x12032TiresRims

Insignia Country Tourer 2.0 Turbo

247 hp · 2.0L I4 225/55 ZR17 97W 5 fitments
GenerationA Facelift 2013–2017
Power247 hp
Engine2.0L I4, Petrol
Center bore67.1 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 ZR17 97W 5x12032Tires
225/55 R17 101V17x7 ET41 5x12032TiresRims
235/50 ZR18 97W18x8 ET42 5x12032TiresRims
235/45 R18 98V18x8 ET42 5x12032TiresRims
245/40 ZR19 98W19x8.5 ET45 5x12032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.