2010 Opel Insignia OPC tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Opel Insignia OPC.

2010 Opel Insignia OPC tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2009 – 2013 Europe market 1 trim

321 hp · 2.8L A28NER V6 225/50 R17 98V 4 fitments

GenerationA 2009–2013

Power321 hp

Engine2.8L A28NER V6, Petrol

Center bore67.1 mm

PCD5x120

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/50 R17 98V	17x7 ET41 ~~5x120~~	2.3	Tires Rims
235/45 R18 98V	18x8 ET40 ~~5x120~~	2.4	Tires Rims
245/40 ZR19 98Y	19x8.5 ET45 ~~5x120~~	2.4	Tires Rims
255/35 ZR20 97Y	20x8.5 ET41 ~~5x120~~	2.4	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.