Skip to content

2023 Opel Insignia tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2023 Opel Insignia.

Bolt pattern
Fitment tables

2 trims sold in 2023

Open a trim for its factory package and every alternative size, front and rear.

Opel Insignia B (Z18) Facelift

2020 – 2023 Europe market 2 trims

Insignia 1.5 D

121 hp · 1.5 L F15DVH I4 Diesel 1.5 L F15DVH I4 215/55 R17 9 fitments
GenerationB (Z18) Facelift 2020–2023
MarketEurope
Power121 hp
Engine1.5 L F15DVH I4 Diesel 1.5 L F15DVH I4, Diesel
Center bore70.2 mm
PCD5x115
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/55 R1717x7 ET44 5x11532TiresRims
OE225/55 R1717x7 ET44 5x11532TiresRims
OE215/55 R1717x7.5 ET45 5x11532TiresRims
OE225/55 R1717x7.5 ET45 5x11532TiresRims
OE245/45 ZR1818x8.5 ET49 5x11532TiresRims
Alt235/45 R1818x7.5 ET41 5x11532TiresRims
Alt235/45 R1818x8 ET41 5x11532TiresRims
Alt235/45 R1818x8.5 ET49 5x11532TiresRims
Alt245/35 ZR2020x8.5 ET49 5x11532TiresRims

Insignia 2.0 D

172 hp · 2.0 L F20DVH I4 Diesel 2.0 L F20DVH I4 225/55 R17 9 fitments
GenerationB (Z18) Facelift 2020–2023
MarketEurope
Power172 hp
Engine2.0 L F20DVH I4 Diesel 2.0 L F20DVH I4, Diesel
Center bore70.2 mm
PCD5x115
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/55 R1717x7 ET44 5x11532TiresRims
OE225/55 R1717x7.5 ET45 5x11532TiresRims
OE245/45 ZR1818x8.5 ET49 5x11532TiresRims
OE245/35 ZR2020x8.5 ET49 5x11535 F / 32 RTiresRims
Alt215/55 R1717x7 ET44 5x11532TiresRims
Alt235/45 R1818x7.5 ET41 5x11535 F / 32 RTiresRims
Alt235/45 R1818x8 ET41 5x11535 F / 32 RTiresRims
Alt235/45 R1818x8.5 ET49 5x11532TiresRims
Alt245/40 ZR1919x8.5 ET49 5x11535 F / 32 RTiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.