Skip to content

1992 Opel Monterey tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 Opel Monterey.

1992 Opel Monterey tire sizes

Bolt pattern
Fitment tables

4 trims sold in 1992

Open a trim for its factory package and every alternative size, front and rear.

Opel Monterey A

1991 – 1998 4 trims

Monterey 3.1 TD

113 hp · 4JG2-TC I4 215/80 R16 103S 2 fitments
GenerationA 1991–1998
Power113 hp
Engine4JG2-TC I4, Diesel
Center bore106.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/80 R16 103S16x6 ET30 6x139.7–TiresRims
245/70 R16 107S16x7 ET38 6x139.7–TiresRims

Monterey 3.1TD

113 hp · 3.1L 4JG2-TC I4 215/80 R16 107S 6 fitments
GenerationA 1991–1998
Power113 hp
Engine3.1L 4JG2-TC I4, Diesel
Center bore100.5 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/80 R16 107S16x6 ET30 6x139.72.4TiresRims
245/70 R16 107S16x7 ET38 6x139.72.4TiresRims
205/80 R16 104S16x6 ET30 6x139.72.4TiresRims
245/65 R17 107T17x7 ET30 6x139.72.4TiresRims
245/60 R18 105T18x7 ET38 6x139.72.4TiresRims
245/60 R18 105T18x7.5 ET30 6x139.72.4TiresRims

Monterey 3.2

174 hp · 6VD1 V6 215/80 R16 103S 2 fitments
GenerationA 1991–1998
Power174 hp
Engine6VD1 V6, Petrol
Center bore106.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/80 R16 103S16x6 ET30 6x139.7–TiresRims
245/70 R16 107S16x7 ET38 6x139.7–TiresRims

Monterey 3.2i

174 hp · 3.2L 6VD1 V6 245/70 R16 107S 6 fitments
GenerationA 1991–1998
Power174 hp
Engine3.2L 6VD1 V6, Petrol
Center bore100.5 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/70 R16 107S16x7 ET38 6x139.72.4TiresRims
245/60 R18 105T18x7 ET38 6x139.72.4TiresRims
205/80 R16 104S16x6 ET30 6x139.72.4TiresRims
215/80 R16 107S16x6 ET30 6x139.72.4TiresRims
245/65 R17 107T17x7 ET30 6x139.72.4TiresRims
245/60 R18 105T18x7.5 ET30 6x139.72.4TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.