Skip to content
tirewheelguide.com

2003 Opel Speedster tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Opel Speedster.

2003 Opel Speedster tire sizes

175/55R17225/45R17
Bolt pattern
Other years
200020012002200320042005 All 2000–2005
Fitment tables

3 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear.

Opel Speedster Speedster

2000 – 2005 3 trims

Speedster 2.0T

200 hp · 2.0L Z20LET I4 175/55 R17 81V / 225/45 R17 90V 1 fitment
GenerationSpeedster 2000–2005
MarketEurope
Power200 hp
Engine2.0L Z20LET I4, Petrol
Center bore65.1 mm
PCD5x110
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front175/55 R17 81V17x5.5 ET26 5x11026TiresRims
Rear225/45 R17 90V17x7.5 ET36 5x11028TiresRims

Speedster 2.2i

145 hp · 2.2L Z22SE I4 175/55 R17 81V / 225/45 R17 90V 1 fitment
GenerationSpeedster 2000–2005
MarketEurope
Power145 hp
Engine2.2L Z22SE I4, Petrol
Center bore65.1 mm
PCD5x110
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front175/55 R17 81V17x5.5 ET26 5x11026TiresRims
Rear225/45 R17 90V17x7.5 ET36 5x11028TiresRims

Speedster 2.2i (GH-E00Z22)

145 hp · 2.2L Z22SE I4 175/55 R17 81V / 225/45 R17 90V 1 fitment
GenerationSpeedster 2000–2005
MarketJapan
Power145 hp
Engine2.2L Z22SE I4, Petrol
Center bore65.1 mm
PCD5x110
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front175/55 R17 81V17x5.5 ET26 5x11026TiresRims
Rear225/45 R17 90V17x7.5 ET36 5x11028TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading