2011 Panoz Abruzzi tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Panoz Abruzzi.

2011 Panoz Abruzzi tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2011 – 2013 USA market 1 trim

650 hp · LS3 V8 275/35 ZR19 100Y / 325/30 ZR19 102Y 2 fitments

GenerationI 2011–2013

Power650 hp

EngineLS3 V8, Petrol

Center bore70.3 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front275/35 ZR19 100Y	19x10 ET40 ~~5x114.3~~	–	Tires Rims
Rear325/30 ZR19 102Y	19x12 ET50 ~~5x114.3~~	–	Tires Rims
Front275/30 ZR20 99Y	20x10 ET40 ~~5x114.3~~	–	Tires Rims
Rear325/25 ZR20 101Y	20x12 ET50 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.