2024 Panoz Esperante tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Panoz Esperante.

2024 Panoz Esperante tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2000 – 2027 2 trims

430 hp · 6.2 L LT1 V8 Petrol 6.2 L LT1 V8 245/40 ZR19 / 285/35 ZR19 2 fitments

GenerationEsperante 2000–2027

MarketUSA

Power430 hp

Engine6.2 L LT1 V8 Petrol 6.2 L LT1 V8, Petrol

Center bore70.3 mm

PCD5x114.3

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front245/40 ZR19	19x8.5 ~~5x114.3~~	–	Tires Rims
	Rear285/35 ZR19	19x9.5 ~~5x114.3~~	–	Tires Rims
OE	Front275/35 ZR19	19x10 ~~5x114.3~~	–	Tires Rims
	Rear325/30 ZR19	19x12 ~~5x114.3~~	–	Tires Rims

560 hp · 6.2 L LT4 V8 Petrol 6.2 L LT4 V8 245/40 ZR19 / 285/35 ZR19 2 fitments

GenerationEsperante 2000–2027

MarketUSA

Power560 hp

Engine6.2 L LT4 V8 Petrol 6.2 L LT4 V8, Petrol

Center bore70.3 mm

PCD5x114.3

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front245/40 ZR19	19x8.5 ~~5x114.3~~	–	Tires Rims
	Rear285/35 ZR19	19x9.5 ~~5x114.3~~	–	Tires Rims
OE	Front275/35 ZR19	19x10 ~~5x114.3~~	–	Tires Rims
	Rear325/30 ZR19	19x12 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.