1993 Panoz Roadster tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1993 Panoz Roadster.

1993 Panoz Roadster tire sizes

245/40R18 285/35R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1992 – 1996 USA market 1 trim

305 hp · V8 245/40 ZR18 93Y / 285/35 ZR18 98Y 1 fitment

GenerationI 1992–1996

Power305 hp

EngineV8, Petrol

Center bore70.3 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front245/40 ZR18 93Y	18x8 ~~5x114.3~~	–	Tires Rims
Rear285/35 ZR18 98Y	18x9.5 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.