1996 Perodua Kancil tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Perodua Kancil.

1996 Perodua Kancil tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1994 – 2002 Southeast Asia market 2 trims

31 hp · 0.66L EF-CL I3 145/70 SR12 3 fitments

GenerationL200 1994–2002

Power31 hp

Engine0.66L EF-CL I3, Petrol

Center bore66.1 mm

PCD4x110

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145/70 SR12	12x4 ET35 ~~4x110~~	29	Tires Rims
155/70 SR12	12x4 ET35 ~~4x110~~	29	Tires Rims
155/65 SR13	13x4.5 ET39 ~~4x110~~	32	Tires Rims

37 hp · 0.85L ED-10 I3 155/70 SR12 3 fitments

GenerationL200 1994–2002

Power37 hp

Engine0.85L ED-10 I3, Petrol

Center bore66.1 mm

PCD4x110

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/70 SR12	12x4 ET35 ~~4x110~~	29	Tires Rims
155/65 SR13	13x4.5 ET39 ~~4x110~~	32	Tires Rims
165/55 HR14	14x4.5 ET40 ~~4x110~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.