1998 Perodua Kembara tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Perodua Kembara.

1998 Perodua Kembara tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1998 – 2007 Southeast Asia market 2 trims

59 hp · 0.66L EF-DET I3 205/70 SR15 2 fitments

GenerationJ100 1998–2007

Power59 hp

Engine0.66L EF-DET I3, Petrol

Center bore66.7 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 SR15	15x5.5 ET35 ~~5x114.3~~	26	Tires Rims
215/60 SR16	16x6 ET45 ~~5x114.3~~	29	Tires Rims

87 hp · 1.3L HC-EJ I4 205/70 SR15 2 fitments

GenerationJ100 1998–2007

Power87 hp

Engine1.3L HC-EJ I4, Petrol

Center bore66.7 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 SR15	15x5.5 ET39 ~~5x114.3~~	26	Tires Rims
215/60 SR16	16x6 ET45 ~~5x114.3~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.