2005 Perodua Kenari tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Perodua Kenari.

2005 Perodua Kenari tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2000 – 2009 Southeast Asia market 1 trim

54 hp · 1.0L EJ-DE I3 155/65 SR13 3 fitments

GenerationL900 2000–2009

Power54 hp

Engine1.0L EJ-DE I3, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/65 SR13	13x4.5 ET39 ~~4x100~~	29	Tires Rims
165/55 HR14	14x4.5 ET39 ~~4x100~~	29	Tires Rims
165/55 HR14	14x5 ET40 ~~4x100~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.