2008 Perodua Nautica tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Perodua Nautica.

2008 Perodua Nautica tire sizes

215/65R16 215/60R17

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2008 – 2010 Southeast Asia market 1 trim

107 hp · 1.5L 3SZ-VE I4 215/65 R16 98S 2 fitments

GenerationJ200 2008–2010

Power107 hp

Engine1.5L 3SZ-VE I4, Petrol

Center bore66.7 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R16 98S	16x6 ET50 ~~5x114.3~~	29	Tires Rims
215/60 R17 96H	17x6.5 ET50 ~~5x114.3~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.