1982 Peugeot 104 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1982 Peugeot 104.

1982 Peugeot 104 tire sizes

165/65R14

Bolt pattern

3x115

Other years

1978 1979 1980 1981 1982 1983 1984 1985 All 1972–1988

Fitment tables

4 trims sold in 1982

Open a trim for its factory package and every alternative size, front and rear.

Peugeot 104 I

1972 – 1988 Europe market 4 trims

104 1.0

44 hp · I4 145x R13 75S 2 fitments

GenerationI 1972–1988

Power44 hp

EngineI4, Petrol

Center bore69.1 mm

PCD3x115

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R13 75S	13x4.5 ET25 ~~3x115~~	28	Tires Rims
165/65 R14 74S	14x5 ET25 ~~3x115~~	29	Tires Rims

104 1.1

50 hp · I4 145x R13 75S 2 fitments

GenerationI 1972–1988

Power50 hp

EngineI4, Petrol

Center bore69.1 mm

PCD3x115

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R13 75S	13x4.5 ET25 ~~3x115~~	28	Tires Rims
165/65 R14 74S	14x5 ET25 ~~3x115~~	29	Tires Rims

104 1.2

56 hp · I4 145x R13 75S 2 fitments

GenerationI 1972–1988

Power56 hp

EngineI4, Petrol

Center bore69.1 mm

PCD3x115

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R13 75S	13x4.5 ET25 ~~3x115~~	28	Tires Rims
165/65 R14 74S	14x5 ET25 ~~3x115~~	29	Tires Rims

104 1.4

79 hp · I4 145x R13 75S 2 fitments

GenerationI 1972–1988

Power79 hp

EngineI4, Petrol

Center bore69.1 mm

PCD3x115

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R13 75S	13x4.5 ET25 ~~3x115~~	28	Tires Rims
165/65 R14 74S	14x5 ET25 ~~3x115~~	29	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.