1970 Peugeot 304 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1970 Peugeot 304.

1970 Peugeot 304 tire sizes

165/65R15 165/65R14

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1969 – 1980 Europe market 3 trims

66 hp · I4 145x R14 78S 2 fitments

Generation04M 1969–1980

Power66 hp

EngineI4, Petrol

Center bore63.5 mm

PCD3x105

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R14 78S	14x4.5 ET23 ~~3x105~~	1.8	Tires Rims
165/65 R15 77S	15x5 ET25 ~~3x105~~	2	Tires Rims

75 hp · I4 145x R14 78S 2 fitments

Generation04M 1969–1980

Power75 hp

EngineI4, Petrol

Center bore63.5 mm

PCD3x105

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R14 78S	14x4.5 ET23 ~~3x105~~	1.8	Tires Rims
165/65 R15 77S	15x5 ET25 ~~3x105~~	2	Tires Rims

46 hp · I4 145x R14 88S 2 fitments

Generation04M 1969–1980

Power46 hp

EngineI4, Diesel

Center bore63.5 mm

PCD3x105

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R14 88S	14x4.5 ET23 ~~3x105~~	1.8	Tires Rims
165/65 R14 77S	14x5 ET25 ~~3x105~~	2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.